Dark side of the faceplate

It was never like this with the pole lathe.

SAMSUNG CSC

Bought it … how the heck do I get the faceplate off?

When the East wind blows, the lazy wind that can’t be bothered to go around you so it goes through you, it can get a bit chilly in the woods where the sun doesn’t shine.  We had the old garage taken down

SAMSUNG CSCand rebuilt

SAMSUNG CSCI’ve bought an old Sheffield-built power lathe so I can spend some time in the warm in Winter and turn some of the things I can’t turn on the pole lathe.  Bowls are for you men to make with younger legs than mine.  Tiny thin treen is impossible on a pole lathe – honey drippers, lace bobbins and such.

I took my newly recovered trailer to near Chorley, Lancashire and collected the lathe, a Myford ML8.  Also collected a new chunky hitch lock from a trailer dealer nearby so I wouldn’t be needing to recover stolen trailers anytime soon.

I sent off for a four jaw chuck for turning bowls.  It’s also made in Sheffield, we can still make good stuff in Yorkshire.  Trouble was I then found the faceplate where I needed to install the new jaws was firmly fast.  With the help of friends I tried a few different ways to get it off.  I needed to hold the spindle locked still and then turn the faceplate clockwise.  I de-threaded the aluminium outboard faceplate trying to use it as the lock.  Then, after reading up internet fora, I engaged a low gear and turning the belt in reverse I hammered a board locked onto the stuck faceplate against the wall.  Still stuck.  Heated it up lightly and gradually with a paint stripper gun … still stuck. Made lunch, had an idea.

SAMSUNG CSC

This might work…

Two levers, one oak lath against the pulleys to lock them, and the ply board to turn the faceplate.  What a feeling when it just unscrewed!

SAMSUNG CSC

Off

The cause was mistreatment by person(s) unknown.

SAMSUNG CSC

Dinged

Can you see the damage to the last thread?  No wonder it was stuck.  I used some anti-seize grease with added flake copper during installation of the Sorby Patriot chuck, that should make life easier in future, and the added electricity will too …

SAMSUNG CSC

Hello world, my first powered wooden treen – test piece only, or do I spy a mustard pot in there?

What’s my axe?

My brother gave me an axe head he bought in a market.  It has proved to be rather a mystery:

What I know about it so far is: It was made by Wm. Greaves & Sons at Sheaf Works, Sheffield, UK.  This firm existed in the nineteenth century :

From “The Cutting Edge” a catalogue of items in the Hawley collection
displayed at the Ruskin Gallery in Sheffield in 1992. The back of this
book contains short histories of the firms which made the tools displayed.

“They (Wm. Greaves & Sons) soon established a large American clientele, and in 1825 built the famous Sheaf Works, the first integrated steel works in Sheffield.

The Sheaf Works was situated alongside the newly opened Sheffield Canal
where Swedish iron bar was offloaded directly into the works to be
converted into steel and goods which were manufactured on the premises.
The canal and the use of steam engine power provided a more efficient
system of production as previously many separate operations were required
for the manufacture and movement of goods.

By 1833 files and edge tools were added to the cutlery and in 1849 the
company started to produce railway springs.  The firm closed in 1850.”

 

English: Steel melting house where was made cr...

English: Steel melting house where was made crucible steel, Samuel Osborne & Co, Sheffield  (Photo credit: Wikipedia)

 

So it’s pretty old.  Even made of “Electro Boracic steel”, Which is either crucible steel with boron salts added or just a promotional wheeze.

The size is 13 and a half inches (count ’em) from what would be the poll to the foremost part of the edge.  It has no poll, showing its age here.  The edge is very heavily curved, which I assume was done to stop it getting stuck in whatever it was cutting.  It is a long, even taper with no flattened cheeks.

I’ve mounted it on a pick shaft, as I believe all axes of the period were hafted on straight handles.

It is VERY HEAVY about 7 and a half pounds, excluding the shaft!

In use the weight and the length seem to suggest it was not swung as a felling axe, unless someone with very mightily strong wrist muscles was able to keep it horizontal.  I can’t for about two swings without pain in the wrist, but I’m a bit old too.  This suggests it was either swung between the legs or with a vertical chopping motion.  There are a couple of similar examples kicking about described as mining axes, but they seem later, having polls.

It is quite a beast:

Any ideas anyone?

Getting rather autumnal in the woods these days and a chill in the morning air with mists.  The sycamore leaves are just about all off – they’ve suffered black spot badly this wet Summer.  Beech leaves beginning to look quite pretty.